含骨架铁ZSM-5的合成及其负载Pt催化剂在正十二烷脱氢反应中的催化性能

采用水热合成法使铁进入分子筛MFI骨架结构,成功合成出含骨架铁的分子筛Na-[Fe]-ZSM-5,并通过离子交换法负载Pt制备脱氢催化剂Pt/Na-[Fe]-ZSM-5。通过正十二烷脱氢反应,研究了该催化剂对长链烷烃脱氢制单烯烃反应的催化性能。采用N2吸附-脱附测试、X射线衍射(XRD)、傅立叶变换红外光谱(FT-IR)、氨气程序升温脱附(NH3-TPD)、吡啶吸附的红外光谱(Py-IR)、CO化学吸附、透射电子显微镜(TEM)等不同方法对催化剂进行了表征。结果表明,通过控制骨架铁含量可调控催化剂表面酸性;含骨架铁的ZSM-5分子筛载体具有抑制负载金属晶粒长大,保持金属高分散度的作用;其负载铂催化剂Pt/Na-[Fe]ZSM-5-50具有表面弱酸中心(0.69 mmol·g^-1)和高分散Pt中心,因而具有良好的长链烷烃脱氢活性、稳定性和单烯烃选择;在转化率稳定在~20%时,TOF为4.56 s^-1,单烯烃选择性为92.7%;在实验范围内,Pt/Na-[Fe]ZSM-5催化剂表面弱酸量和脱氢反应的本征活性(TOF)均随催化剂铁含量的增加而增加。     

g-C3N4/Ag/TiO2复合材料的构筑及其光催化性能（英文）

以合成的g-C3N4纳米片和Ag/TiO2空心微球为原料,采用机械搅拌的方法构筑了g-C3N4/Ag/TiO2三元复合光催化剂。采用X射线衍射(XRD)、傅里叶变换红外光谱(FT-IR)、扫描电镜(SEM)、X射线光电子能谱(XPS)、紫外-可见光漫反射(UV-Vis DRS)和光致发光光谱(PL)对g-C3N4/Ag/TiO2进行了表征。研究表明,g-C3N4/Ag/TiO2是由Ag/TiO2微球和g-C3N4纳米片复合而成的。与TiO2相比,其可见光响应范围延长,光生载流子的分离速率加快。在室温下,用降解罗丹明B的反应考察了g-C3N4/Ag/TiO2的可见光催化活性。研究表明,光照180 min时,g-C3N4(0.5%)/Ag/TiO2显示了最高的光催化活性(91.9%),分别是TiO2和Ag/TiO2的7.5和1.8倍。光催化活性的提高与合理的异质结构建和Ag的导电性能有关。     

Highly Sensitive Electrochemiluminescent Insecticide Sensor Based on ZnO Nanocrystals Anchored Nickel Foam for Determination of Imidacloprid in Real Samples

In this work, a novel electrochemiluminescent (ECL) pesticide sensor based on zinc oxide nanocrystals decorated nickel foam is proposed for determination of imidacloprid for the first time. The silica film was used as a morphology‐controlling factor for modification of the electrode with zinc oxide nanocrystals. Zinc oxide was selected as luminescent material due to its cheapness, non‐toxicity, high thermal stability and excellent luminescence properties which truly adhered on the surface of nickel foam. The K₂S₂O₈ was used as strong co‐reactant for this purpose. The silica template plays an important role in controlling the size of ZnO nanocrystals. The Physical morphology of the ZnO/Ni‐foam electrode was performed by electrochemical impedance spectroscopy, Brunauer‐Emmett‐Teller (BET), X‐Ray diffraction analysis, field emission scanning electron microscopy, and energy‐dispersive X‐ray analysis. The ultra‐sensitive electrochemiluminescence method was successfully used for ultra‐trace determination of imidacloprid. The linear dynamic range and low detection limit were obtained 3×10^?14 ?8×10^?8 M and 4.4×10^?15 M, respectively. Also, the relative standard deviation for 15 repetitive optical signals was calculated 1.09 %.The present ECL sensor exhibited superior performance toward the accurate determination of imidacloprid with good reproducibility and stability.     

Templated‐Assembly of CsPbBr3 Perovskite Nanocrystals into 2D Photonic Supercrystals with Amplified Spontaneous Emission

Perovskite nanocrystals (NCs) have revolutionized optoelectronic devices because of their versatile optical properties. However, controlling and extending these functionalities often requires a light‐management strategy involving additional processing steps. Herein, we introduce a simple approach to shape perovskite nanocrystals (NC) into photonic architectures that provide light management by directly shaping the active material. Pre‐patterned polydimethylsiloxane (PDMS) templates are used for the template‐induced self‐assembly of 10 nm CsPbBr₃ perovskite NC colloids into large area (1 cm²) 2D photonic crystals with tunable lattice spacing, ranging from 400 nm up to several microns. The photonic crystal arrangement facilitates efficient light coupling to the nanocrystal layer, thereby increasing the electric field intensity within the perovskite film. As a result, CsPbBr₃ 2D photonic crystals show amplified spontaneous emission (ASE) under lower optical excitation fluences in the near‐IR, in contrast to equivalent flat NC films prepared using the same colloidal ink. This improvement is attributed to the enhanced multi‐photon absorption caused by light trapping in the photonic crystal.     

An Ultrastable,Small {Ag7}5+ Nanocluster within a Triangular Hollow Polyoxometalate Framework

Small Ag_n nanoclusters (n<10) have been emerging as promising materials as sensing, biolabeling, and catalysis because of their unique electronic states and optical properties. However, studying synthesis, structure determination, and exploration of their properties remain major challenges as a result of the low stability of small Ag nanoclusters. Herein, we synthesized an atomically precise face‐centered‐cubic‐type small {Ag₇}⁵⁺ nanocluster supported by a novel triangular hollow polyoxometalate (POM) framework [Si₃W₂₇O₉₆]^18?. The cluster showed unique {Ag₇}⁵⁺‐to‐POM charge transfer bands in both visible and UV light regions. Furthermore, this small {Ag₇}⁵⁺ nanocluster exhibited an unprecedented ultrastability in solution, despite having exposed Ag sites that can be accessed by small molecules, such as O₂, water, and solvents.     

聚乳酸组织工程支架结构的精密调控

采用糖球模板法结合热致相分离技术,制备了孔径尺寸、内连通度及孔隙率高度可控的左旋聚乳酸(PLLA)支架材料,并通过扫描电镜(SEM)、红外光谱(FTIR)以及示差扫描量热法(DSC)对其空间结构及性能进行了系统研究.支架材料孔径从50μm到800μm及内连通孔径从10μm到200μm连续可调,微观孔壁结构根据不同溶剂可形成各异的微纳米结构.支架的制备对PLLA化学结构无显著影响,但相分离过程会不同程度地降低PLLA的结晶度.